<< Back E-Mail A Friend
Genuine Siemens DEKA IV Mototron 220 lb/hr Low Impedance Gas & Flex Fuel Injectors ( Long Style )
These injectors flow 220 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI! These units are low-impedance and require peak and hold injector drivers or additional resistors for saturation drivers. Despite the high flow rate, they are linear and controllable at low pulse widths compared to other extreme flow injectors! These injectors are sometimes referred to as 212lb/hr or 225lb/hr injectors.
These injectors will allow you to run methanol, ethanol and other flex fuels with fewer injectors for high horsepower applications. Don't settle for questionable modified high flow injectors when you can have Genuine Siemens quality and performance with these injectors. We have used these injectors in engines making in excess of 3,000hp without issues! Methanol-safe!
Features: Genuine, reliable Siemens Injectors Excellent response characteristics Robust Design Low Impedance Fits in most Deka I, Deka IV Long Style, Deka V Long Style, & Deka VII Long Style applications
Specifications: Coil Resistance: 2.27 Ohms / Low Impedance / Low-Z (ECM peak & hold driver or modifications required) Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 220 lb/hr = 2433 cc/min Offset: 0.64ms Turn on time: 1.5ms Turn off time: 1.3ms Connector: Bosch EV1 Series: DEKA 4 ( DEKA IV ) Orifice Type: Single Orifice Spray Pattern: 10-15 Degree Pencil Cone Factory fitted with Viton upper and lower o-rings
Part #: 424