Innovation
not Imitation

SBC

SBC

Short and Long-Block Combinations

Rotating Assembly and Piston/Rod Kits

Engine Blocks

SBC SHP Iron Block 9.025 4.125/400
$1,718.99
SBC SHP Iron Block 9.025 4.000/400
$1,718.99
SBC SHP Iron Block - 9.025 4.125/350
$1,718.99
SBC SHP Iron Block - 9.025 4.000/350
$1,718.99
DART SHP 31161211 SBC BLOCK
$1,662.99
DART LITTLE M 31151211 SBC BLOCK
$2,402.99
DART LITTLE M PRO 31131211 SBC BLOCK
$2,898.99
DART IRON EAGLE 31121222 SBC BLOCK
$3,141.74

Crank Shafts

Connecting Rods

SBC CONNECTING RODS

The small-block Chevy has been around for a long time now, and it has proven itself as a powerful engine platform.  When you are stepping up into the world of big-power forced inductions, a good set of connecting rods need to be part of the foundation.

We have spent countless hours designing, testing, tuning, and racing high-horsepower supercharged and turbocharged combinations.  We know what works and what doesn't.  We have selected a few of our most common connecting rod offerings here for you to purchase.  If you don't see what you are looking for, chances are good we carry it.  Give us a call or send us an e-mail and we will gladly get back with you right away!

At STEVE MORRIS ENGINES, you are dealing with engine builders, tuners, and racers - not people who can read some numbers from a catalog or website!

SBC 4340 Forged I-Beam Rods 6.000
$309.99
SBC 4340 Forged I-Beam Rods 5.700
$309.99
SBC Billet Connecting Rod Set 6.250
$1,488.99
SBC Billet Connecting Rod Set 6.200
$1,488.99
SBC Billet Connecting Rod Set 6.125
$1,488.99
SBC Billet Connecting Rod 6.000
$207.99
SBC Billet Connecting Rod Set 6.000
$1,488.99
SBC 4340 Sportmaster Rods 6.000in
$757.99
SBC 5.700 Steel Rods
$699.99
SBC 5.700 Steel Rod
$92.99
SBC 4340 H-Beam Rods 6.000in
$586.99
SBC 4340 H-Beam Rod 6.000in
$81.99
SBC 4340 Forged H-Beam Rods 6.300
$487.99
SBC 4340 Forged H-Beam Rods 6.250
$459.99
SBC 4340 Forged H-Beam Rods 6.200
$459.99
SBC 4340 Forged H-Beam Rods 6.125
$459.99
SBC F/W 4340 Forged Rods
$544.99
SBC 4340 Forged H-Beam Rods
$487.99
SBC 4340 Forged H-Beam Rods 6.000
$409.99
SBC 4340 Forged H-Beam Rods 5.850
$459.99
SBC 4340 Forged H-Beam Rods 5.700
$498.99
SBC 4340 Forged H-Beam Rods 5.565
$487.99
SBC Forged H-Beam Rods 6.000/2.000
$1,314.99
SBC Forged H-Beam Rods 6.000/2.100
$1,314.99
SBC Forged I-Beam Rods - 6.200/2.100
$1,661.99
SBC Forged I-Beam Rods - 6.125/2.100
$1,661.99
SBC Forged I-Beam Rods - 6.000/2.000
$1,661.99
SBC Forged I-Beam Rods - 6.000/2.100
$1,661.99
CP Carrillo BC21-6006LW Rods
$1,272.60
CP Carrillo BC20-6006LW Rods
$1,272.60
CP Carrillo BCQD4-6006LW Rods
$1,272.60
CP Carrillo BC21-5706-STK Rods
$1,272.60
CP Carrillo BC21-61271 Rods
$1,272.60
CP Carrillo BC21-60071 Rods
$1,272.60
CP Carrillo BC21-57071 Rods
$1,272.60
CP Carrillo BC20-61271 Rods
$1,272.60
CP Carrillo BC20-60071 Rods
$1,272.60
CP Carrillo BC20-57071 Rods
$1,272.60
Carrillo BC21-60071 I-Beam Rods
$1,272.60
Oliver C6000STSW8 I-Beam Rods
$1,488.11
Callies ULTRA-H U16100 Rods
$1,364.00
Callies ULTRA-I U14135 Rods
$1,732.00
Carrillo Aluminum Rods
$1,599.99
MGP Aluminum Rods
$1,599.99

Pistons

 CP Bullet Pistons Logo 

 

When designing and building your forced induction engine, parts selection can be a bit overwhelming with all of the potential choices out there.  Why worry if the information you are getting second-hand can be trusted - let STEVE MORRIS ENGINES help you make the correct, informed purchase decision!  After all - shouldn't you trust the people who actually build and test these engines on a daily basis?

In the following pages, we outline a few of the most popular products from trusted vendors such as MAHLE, DIAMOND, and CP PISTONS.  This is by no means all that we have to offer.  If you don't see a specific part number that you are wanting, please contact us!  If your looking for a different bore size (part number) than we have listed is will be the same if not close to the same price as one we have listed.

When a shelf-stock piston kit just won't do, we can custom-design a piston kit to suit your requirements.  These custom piston kits will come standard with a hard anodizing, pin fit, internal milling, support rails, H-13 tool steel pin, Total Seal piston ring kit for forced induction use, and Spirolox.  Our custom piston design has been refined over many years of engine building, dyno testing, and racing. When other engine builders were just trying to put on skirt coatings or some top coating we were doing Hard Anodizing, people are just catching up with what we have done for over 5 years.  We have proven these designs in engines surpassing 4,500+hp, so you can be confident they will work for you!

Have a look at the following pages and contact us with any questions you may have!

SBC Dished Piston Set 4.155 Bore
$589.03
SBC Domed Piston Set 4.155 Bore
$589.03
SBC Domed Piston Set 4.040 Bore
$589.03
SBC Domed Piston Set 4.030 Bore
$589.03
CUSTOM-DESIGNED SBC PISTON KIT
$1,899.99

Engine Bearings

Gaskets and Seals

Fel-Pro 2912 Rear Main Seal
$29.99

Camshafts

Here at Steve Morris Engines cam design never stops.  We are continually evaluating cam designs based on our testing here at Steve Morris Engines and from our customer feedback.  The latest cam designs are only done here by Steve Morris, call or e-mail us about your needs - we are glad to help.  Don't be fooled by others, ask them to be detailed about their recommendations and why.  If they need to get back with you it is because they are just asking some cam manufacture for a recommendation.  That is not what you are paying for from Steve Morris Engines, you get my cam lobes based off my experience.

 

* We will be sure to call you for the specifics of your application within 48 hours of your purchase of one of our custom camshafts.

Timing Components

HD Timing Chain Set - 86-97 SBC
$62.99
Timing Chain Set - SBC 3pc.
$19.99
Billet True Roller Tmng Set - SBC
$133.99
Gear Drive - SBC
$228.05

Harmonic Balancers

Oiling Systems

Lifters

U/P - Ultra Pro Pressurized Oiling to Axle Assembly 
T/B - Tie Bar style lifter does not use OEM lifter retention
P/O - Pressure Oiling to Axle Assembly
O/C - Pushrod cup is on center in the lifter body
NBA - Nascar Bearing and Axle Assembly for Endurance Applications
UFRS - Ultimate Fighter Roller Series Bushing lifter NO NEEDLES

Roller Lifters - SBC Offset (2)
$104.99
Roller Lifters - SBC Offset
$607.99
Roller Lifters - SBC Severe Duty
$711.99
Roller Lifters E/M - SBC
$1,067.99
Roller Lifters - SBC
$86.99
CRO66290-16 Roller Lifters - SBC
$582.99
Roller Lifters - SBC SB2
$582.99
Roller Lifters - SBC (2)
$69.99
CRO66200-16 Roller Lifters - SBC
$474.99
Hydraulic Lifters - Chevy
$81.99

Cylinder Heads

Cylinder heads are an important part of your performance engine build.  Shown here are just a very few of the many cylinder heads and packages that we offer.  We can also offer you all-billet versions, as well as some class-specific castings.  If you don't see it here, please call or email!

Iron Eagle SBC 200 Cylinder Head
$719.99
Iron Eagle S/S SBC Cylinder Head
$307.99
SBC 190cc Street Heads 65cc Vortec
$1,668.40

Pushrods

Valves

SBC S/D 1.940in Intake Valves
$258.99
SBC R/M 1.625in Exhaust Valves
$142.99
SBC R/M 1.625in Exhaust Valve
$20.99
SBC S/D 2.125in Intake Valve
$35.99
SBC R/M 2.020in Intake Valves
$142.99
SBC R/M 1.600in Exhaust Valves
$154.99
SBC R/M 1.600in Exhaust Valve
$20.99
SBC S/D 2.100in Intake Valve
$35.99
SBC R/M 1.500in Exhaust Valves
$149.99
SBC R/M 1.500in Exhaust Valve
$20.99
SBC R/M 1.940in Intake Valves
$142.99
SBC R/M 1.940in Intake Valve
$20.99
SBC S/D 2.100in Intake Valves
$258.99
SBC S/D 2.125in Intake Valves
$258.99
SBC S/D 2.055in Intake Valve
$33.99
SBC P/F 2.020in Intake Valves
$251.99
SBC P/F 2.020in Intake Valve
$33.99
SBC P/F 2.055in Intake Valves
$239.99
SBC P/F 2.055in Intake Valve
$33.99
SBC P/F 1.600in Exhaust Valves
$227.99
SBC P/F 1.600in Exhaust Valve
$33.99
SBC S/D 2.080in Intake Valve
$33.99