Dominator EFI Vehicle Management Systems are intended for all engine applications, from street to unlimited high-end racing applications. In addition to the transmission control, drive by wire, and dual wideband oxygen sensor options, Dominator systems have nearly unlimited capabilities to control any power adder, input, or output you can throw at them. Need to run a turbocharged, methanol engine V8? No problem with Dominator EFI. How about control a TH400 with converter dumps and a lock-up converter? No problem. There are also enough inputs and outputs to allow the Dominator VMSs to serve as their own data acquisition and control module. The Dominator VMS will eliminate the need for additional controllers as they are all contained in this one unit. The only thing limiting the Dominator Vehicle Management System is your imagination!
This kit also includes the MSD Pro 600!
The PRO 600 has built-in protection for accidental reverse battery connection, over-temperature protection, and diagnostics that can identify an issue with individual coils should a problem arise via CAN to the Dominator ECU or via the onboard LEDs. A programmable power setting allows racers to switch between a user-adjustable 250 to 400 millijoule output, or the industry-leading output of 680 millijoules via an activation wire or when used with Holley EFI software via the fully tuneable tables - making the PRO 600 ideal for Drag Week style cars all the way up to Pro-Mod and Radial vs the World cars. Turn it down for the long haul, and then set it to kill mode at the strip.
We also include our 6.86" Pro Dash, which is easy to mount in also any application.
The 6.86" Pro Dash is completely customizable for use in a variety of motorsports applications. It features a 6.86" 1280x480 resolution low glare, high brightness, high contrast, full-color capacitive touch screen for easy viewing even in the sun, integrated shift light and warning LEDs, plug and play connection to all Holley EFI systems as well as a weather-resistant aluminum housing featuring flexible mounting options. Monitor the power of your Holley EFI system at a glance! Holley EFI 6.86" Pro Dash includes everything needed for installation!
1 - Dominator EFI ECU
1 - Holley EFI 6.86" Pro Dash
1 - MSD PRO 600 CDI Ignition and Coil Kit
1 - 100 PSI Stainless Pressure Sensor
1 - NTK Wideband Oxygen Sensor
1 - NOS Solid State Relay
1 - Air Temperature Sensor
1 - Main Power Harness
1 - Coolant Temperature Sensor
2 - V8 over Manifold, Bosch Style Injector Harness
2 - 200 PSI Stainless Pressure Sensor
1 - Holley EFI High Flow Dual Solenoid Boost Control Kit
1 - Hall Effect Drive Shaft Sensor
1 - Crank/Cam Ign. Harness, Fully Terminated Harness
1 - j2A, j2B, j3, j4 Connector & Pin Kit
1 - Holley EFI 2 Axis G-Meter
1 - Driveshaft Sensor Mount Bracket
1 - 8 Magnet Split Collar
1 - Holley EFI 8 Channel CAN EGT Kit
1 - Universal MPFI Coil on Plug Main Harness
2 - Injector Driver Module, w/Harness
1 - Time-Based Traction Management
1 - 7 Bar MAP Sensor
1 - Throttle Position Sensor