not Imitation

Holley Sniper Stealth 4500 - Shiny Finish


<< Back

Holley Sniper Stealth 4500 - Shiny Finish


  • Supports up to 1500 HP Naturally Aspirated or 1250 HP Forced Induction with Eight 100 Lb/Hr Injectors
  • Compatible with Draw through or Blow through forced induction applications
  • 2.125” Throttle Plates, Flow 1440 CFM for large cubic inch engines
  • 2.5Bar MAP Sensor
  • Integrated ignition timing control
  • Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input
  • Gen 3 Ultra Dominator Style 4 Bolt Air Cleaner Flange
  • -8AN Fuel Inlets
  • High Resolution Full Color Touchscreen for Initial Setup, Tuning, and Gauge Displays
  • Simple Calibration Wizard (Answer a few questions about your engine and it creates the base map, then starts tuning on its own!) - NO laptop required
  • Self-tuning ECU means you don’t have to be a computer/tuning wiz to have EFI!
  • The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides realtime Fuel Map Learn
  • Built-in Single Stage Wet or Dry progressive nitrous control
  • Three Programmable 0-5V Sensor Inputs for Oil/Fuel/Dome or Nitrous Pressure or other critical information
  • Six Programmable Ground Outputs, Five programmable ground inputs. These can be used to trigger or control external devices such as nitrous solenoids, boost control solenoids. Or to provide the ECU with an Input to turn on function such as an ignition timi
  • One +5v Reference Output - +5V Power Supply for 0-5v Sensors, One Sensor Ground – Ground supply for 0-5v Sensors
  • Throttle body mounted ECU – no extra boxes to mount
  • Only 4 Wiring Connections Required! (Battery +, Battery - , Switched Ignition & RPM)
  • Required external fuel pressure regulator, 12-848 is recommended
  • Customizable secondary fuel pump output (TPS, RPM or Boost enabled)
  • User friendly Boost Control with handheld adjustability
  • Free Software included comprehensive datalogging tool to help you maximize the performance of your engine
  • Real-time datalogging to the included 3.5” Touch Screen, allows you to save information to the SD card without needing a communication cable
  • Programmable Target Air Fuel Ratios per Boost level
  • Advanced boost control available via free Sniper EFI tuning software, including Boost vs RPM and Boost vs Time
  • OEM Style TPS/IAC, for years of dependable service
  • Included clamp-on oxygen sensor kit ensures a leak free oxygen sensor installation, with Stainless Steel T-Bolt clamps and a Stainless Steel (Weldable) oxygen sensor flange

Every Sniper EFI Throttle Body that ships from Steve Morris Engines is tested on our in house run stand to guarantee functionality before going to our customers.

NOTE:  When ordering this EFI system, please make sure you have the proper fuel pump, boost-referenced pressure regulator, carb hat, etc.  In the pull-down menu below, we recommend the HOLLEY regulator and fuel pump as seen here:

Part #: 550-841

Price: $1,715.95
Please Call for Availability !
Add SME Boosted calibration? MUST SHIP FROM SME:
Add Second Calibration?:
Add 4500 Dominator Carb Hat?:
Add complete fuel system:

Engine Type (SBC, BBC, etc)? *

Engine Displacement? *

MAX Engine RPM? *

Camshaft details if known *

Do you want the SNIPER to control engine timing? (MUST have a MSD box or Hyperspark box) *

What power-adder will you be using? *

Max boost? *

Which ignition Box? *

Is it intercooled? *


Product Q & A

Related Items
Holley Sniper Stealth 4500 - Black Finish
Holley Sniper Stealth 4500 - Black Finish

Price: $1,767.95
Please Call for Availability !

View More
Holley Sniper Stealth 4500 - Gold Finish
Holley Sniper Stealth 4500 - Gold Finish

Price: $1,767.95
Please Call for Availability !

View More