Take a look at all of our Tuning Videos We finally have the Big Stuff 3 video done 

 

 

 

 10/15/11 

 

New Results for the Wagon!!

Check out the cool new Bumper Showing off the new Pro-Volute!

And Our new Holley EFI system !

 

  1.19 / 3.14 / 4.66 At 162.92 !! 

 

Of Course we had a great First full pass, but the next pass out we broke the trans over reved and knocked a ex rocker off it and broke a intake lifter. So we were done for the weekend.

The first attemps for the weekend had all sorts of little clitchs, probably because we put the engine in the car the night before we left for the race!

 

Really looking to go well next year and run some  4.50's and 6.90's in the 1/4!!

 

 

 

10/28/11

Customer came home and his six year old had drawn this, it has our old paint scheme on it, but it sure is cool. Yes, the love of wagons starts early!  I expect great things out of this kid!  (Later on in life we will explain that wheelie bars are for sissies)

 

 

 

 

 

 

4/17/11

Man are things busy! We are finallly getting engines out as we should,

The engine on our Dyno below is the 12th engine to run across the dyno in 2 1/2 weeks!

This one is a 526 BBChrysler for Brett Ward

 

4/1/11

The seminar was really good and again good response from the people that came. I want to thank Jake at Jakes Performance Fabrications in Lees Summit MO. I got to tell you, Jake is a spot on good guy and I think has a real good thing going on over there. I highly recomend Jakes Performance Fabrications. Give him a call!

www.jakesperformancefabrication.com/ 

 

 

 

2/28/11

You want to talk about SWEET!!!

Off the trailer with no further set up than what Ron at www.clocksoffracing.com did in his shop the car went a 1.18 60ft then came back and went 1.19 with a soft 4.81 at 154MPH tons left in this car! Could not be happier with the car and its new set up from Ron!

 

 2/1/11

The First seminar went very well and we had a  good response from the attendees. The presentation went for 5 hours with many questions asked and answered during the presentation, i then spent another 3 hours with the attendees answering questions.

We will be holding a new seminar at Jake's Performance Fabrication in March. the exact date will be posted soon!  

 

Inside the Boosted Engine 

Tech Seminar coming in March!

I will be holding another seminar in Lees Summit Missouri in March

The seminars will cost $250 per attendee

The seminar will be approximately 4 to 5 hours long Then Q and A time (pretty much unlimited)

The seminar will cover the oil pan to the power adder, covering what I use, why and how.

Blocks, finishes, gaskets 

Cranks, type's, clearances and balancing

Rods, type's per application

Pistons, design, coatings,  

Rings, design, dimensions, coatings

Oiling systems

 Valve Train System, Camshaft basic design, lifters, push rods, rockers, springs, valves

Cylinder heads, ports and design

Intakes

Carbs/EFI

Power adder sizing, characteristics.

Fuel system requirements

Ignition requirments

Inter-cooling

Q and A time

ADDED benifit every paid attendee will recieve Discount coupons to Manufactures products like

Dart

Magnafuel

C and S carbs

Diamond Pistons

Engine Pro Parts

More to come.

 

My goal is to give each person $1000 or more back in discounts for parts you will really use!

 

 

12/23/2010

Hi, and welcome.

Please bare with us the look for the site is  brand new as of 12/23/10 and I will be adding content over the next few weeks including detailed info on all our engine packages!

 

Steve Morris is NOT associated with SMRE performance at all. They are a separate company that have nothing to do with me. Sorry for the confusion.

I still work with New Era Racecraft on some project but I am not there. I bought the engine equipment from New Era and have set up this new shop in muskegon. If you want parts, kits or engines from me this is the only place.

Please remember if you are not talking directly to me here on this site or on the phone 231-747-7520 then your dealing with someone else.